Buckling of single-walled and multiwalled carbon nanotubes SWNTs and MWNTs, respectively due to axial compressive loads has been studied by molecular mechanics simulations, and results compared with those from the analysis of equivalent continuum structures using Euler buckling theory and the finite element method. It is found that a MWNT of large aspect ratio length/diameter buckles as a colum...

using  principle  of  minimum  total  potential  energy  approach  in conjunction  with  rayleigh-ritz  method,  the  electro-thermo-mechanical  axial  buckling  behavior  of  piezoelectric  polymeric cylindrical  shell  reinforced  with  double-walled  boron-nitride nanotube  (dwbnnt)  is  investigated. coupling  between  electrical and mechanical  fields  are  considered  according  to  a  re...

in this paper, the modified euler-bernoulli beam model is presented to examine the influence of surface elasticity and residual surface tension on the critical force of axial buckling of nanotubes in the presence of rotary inertia. an explicit solution is derived for the buckling loads of microscaled euler beams considering surface effects. the size-dependent buckling behavior of the nanotube d...

Arteries are modeled, within the framework of nonlinear elasticity, as incompressible two-layer cylindrical structures that are residually stressed through differential growth. These structures are loaded by an axial force, internal pressure and have nonlinear, anisotropic, hyperelastic response to stresses. Parameters for this model are directly related to experimental observations. The possib...

existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. therefore, it must be considered in stress analysis and designing and loading of such structures. in this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial c...

Article history: Received 26 February 2013 Received in revised form 19 July 2013 Available online 17 August 2013 Dedicated to Prof. S. Kyriakides on the occasion of his 60th birthday.

this study aimed to investigate the effects of stiffeners on buckling of thin cylindrical shells under uniform axial compression. to this end, more than 300 finite element models of stiffened cylindrical shells were prepared. the variables considered are shell thickness, number, dimension and the location of the vertical and horizontal stiffeners as well as circular symmetrical imperfections. r...

BACKGROUND This study compared axial length changes induced by circumferential scleral buckling using a silicone sponge with literature reports for solid silicone rubber. METHODS Records of patients treated with scleral buckling in 2009-2013 using a silicone sponge, with preoperative axial length biometry measurements were reviewed. Additional information included age, type of surgery, additi...

Buckling analysis of thin cylindrical shells is very important due to their production process.  Usually longitudinal and transversal stiffeners are used to increase the buckling stiffness. In this paper, considering a thin cylindrical shell with longitudinal and transversal ribs subjected to axial force and lateral pressure, the influence of different aspect of axial force to lateral pressure ...

PURPOSE A prospective study was performed to investigate changes in corneal shape and axial length following scleral buckling surgery. METHODS We investigated the changes in corneal shape, refraction, and axial length following scleral buckling surgery in 24 patients who underwent local buckling and 14 patients who underwent encircling with additional segmental buckling. The corneal shape was...